Labrador Retriever Head Embroidered Iron On Patch
This small brown lab is an embroidered 2.5" (length) x 2.5" (height) approximate, design, with iron on glue backing.
Instructions for adhering your patch to material:
1: Heat iron on cotton setting.
2. Pre-Heat surface of garment by ironing for 10 seconds
3. Place patch down on garment, embroidery face up. Cover with fine clothing press firmly with iron 15-20 seconds.
4. Turn garment upside down, or inside out, and iron the back side of patch and garment for 20 seconds.
5. Can also be sewn on. For a very permanent adhesion use both glue and then sew down edges. DO NOT HEAT APPLY TO SATIN OR NYLON.